Cabin

DOORS:

DESCRIPTION. Two sliding doors are installed, one on the right front of the cabin for entrance to the pilot's seat and one on the left rear of the cabin for entrance to the passenger's seat. A step is located below each door.
REMOVAL. Unscrew bolt in stop at rear of upper track, remove stop, and slide door back and off 'its track.
INSTALLATION. Roll door back on track from rear and install stop at rear of upper track by means of a bolt, washer, and nut.
WINDOWS. There are two sliding windows, one on either side of the pilot's seat, and four jettisonable windows. There is one jettisonable window just below the left sliding window, another in the left door, the third in the lower panel of the right door, and the fourth just aft of the right door. All jettisonable windows can be quickly removed by pulling on the two canvas straps on the outside or by kicking or pushing them out from inside the cabin. Two other windows are also installed, one on either side of the aft seat.

REMOVAL. Remove the rubber filler strip around each window. Remove window and rubber window seal.

Centre Structure